MakerBot Digitizer Manuel d'utilisateur télécharger pdf (Page 60)

MAINTENANCE

CALIBRATION TOOL POSITION

LASER ADJUSTMENT SCREW LOCATIONS

Caution: The range of the angle adjustment screw is limited. Do not use excessive

force to turn the screw.

1. Adjust the direction of the right laser. Turn the inner adjustment screw [2] so that the laser

line lines up with the spine of the calibration tool. Turn the adjustment screw clockwise

to move the laser line to the right or counter-clockwise to move the laser to the le.

1 32 4

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 73 74

Pas de commentaire

MakerBot Digitizer Manuel d'utilisateur Page 60